Reticle library · Trijicon
Drawn to scale from Trijicon’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Drawn from Trijicon, Inc.’s published specification.
In the second focal plane the subtensions are only true at one magnification — check your manual for which, and dial there before you hold.
SFP, true at 30x. 0.0625 MOA lines; a mark every MOA on all four arms, 0.5 MOA tall at the odd MOA and 1.0 at the even MOA; horizontal +-10 (2X 10 MOA), vertical +5 / -16; numerals 4 and 8 below the horizontal line, even numerals left of the elevation line. Whole reticle illuminated (red/green LED).
Verified 15 Oct 2026 against Tenmile_MOA_Long_Range_Reticle_3000014.pdf read as vector fills. Scale 20.95 pt/MOA from the 1-MOA mark pitch (horizontal and vertical marks on the lattice to 0.02 MOA) and the 20 MOA / 2X 10 MOA / 5 MOA / 16 MOA dimension lines. Drawn sizes agree with every callout: marks 0.5 and 1.0 (0.5 MOA / 1 MOA, centred), line 0.0625 (0.0625 MOA STADIA LINE WIDTH), 2 MOA pitch between like marks.
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Trijicon.